[aeolus430]

I though the duration of AUD is 4.5 hours. However, I just register to take AUD and the confirmation states that the duration of the exam is 5 hours. Anyone knows why? THANKS!!

[potatogun]

For checking in. It is a 4.5hr test but you might not start right away.

FAR 92 - AUD 91 - REG 94 - BEC 86

[koliver]

I believe its because they tell you to show up a half an hour early in order to get signed in and get everything put in your locker beforehand. I was worried about it too but everything seemed to go smoothly! 🙂

FAR: 78 BEC: 79 REG: 86 AUD: 74, 83 DONE!!!

[albinoritz]

I finished audit with 2 and a half hours left on the clock, I wouldnt worry about it to much

REG - 71, 74, 78 5/28 FIN - 76, BEC - 71, 77, AUD - 81

DONE!

[SeanM]

Ya, Prometric always says an extra 1/2 hour than you are alloted on the exam. Although the only time it even took me a half hour to check in was when I took BEC on the last day of a testing window…. the place was packed.

FAR-87; AUD-89; BEC-85; BEC-84
DONE!

[Anonymous]

I arrived for my exam at 7:30AM, and began testing at about 7:40! My testing center wasn't crowded at all though. I was super thankful to get to start my exam a little early to be done with it as soon as possible!

Also.. as for the length of the test, I finished with about 15 minutes on the clock. I took my sweet time on each and every MC question to make sure I wasn't making any mistakes. I spent about 45 minutes on each testlet and had tons of time to do both simulations. I wanted to utilize the time I was given and read critically over every question. I made quite a few silly mistakes when doing the MC for Becker, so I wanted to be 100% sure I didn't do it on the actual exam!

[Author]

Replies